Knowing how to look after woven outdoor furniture is what keeps a set in service for years. Most of what owners take for damage — a fine crack in a teak arm, a darker patch of grain, a silvering surface — is normal material behaviour that needs no action at all. A smaller group of issues is worth attention, and a few should go straight to the manufacturer. This guide covers all three, for woven outdoor furniture in resin, rope and teak.

Know What You Are Looking At First
Before assuming something has failed, work out what you are actually looking at. Woven furniture has three separate systems, and each behaves differently over time.
- The weave — the resin strands or rope cord you sit against. It is woven under tension across the frame, so anything lifted, slack or broken here is work for us rather than a home fix.
- The frame — the powder-coated aluminium or teak structure underneath. Teak moves slightly with the seasons as it absorbs and releases moisture, and our furniture is engineered to accommodate that movement.
- The cushions and fabric — foam, covers and zips. The one part of the set that genuinely wears with use, and the part you can most readily maintain yourself.
The most common mistake is treating normal material behaviour as damage. Teak in particular changes constantly in its first months outdoors, and almost none of it needs intervention.
What Is Normal on Resin Wicker — and What Is Not
Our resin is ECOLENE®, an extruded polyethylene fibre with the pigment blended through the strand, so it does not fade patchily, flake or need recoating. It is formulated to withstand UV radiation, extreme heat, oxidation, humidity, mould and mildew, and stays stable through temperature swings without cracking or splintering. In practice, a resin set that looks tired almost always needs cleaning rather than repair.
Lifted, loose or broken strands
- A lifted or snapped strand is not a do-it-yourself repair. The fibre is woven under tension across the frame, and heating, re-weaving or gluing a strand risks deforming the surrounding weave.
- Photograph the affected area and contact us. Our patented fibre identification technology means replacement material can be matched reliably to the original colour.
- In the meantime, keep the piece clean and dry and avoid putting weight on the damaged section.
What you can do yourself
- Clean the weave every three months with a soft damp cloth and lukewarm water to remove dust and debris. Near beaches and pools the furniture needs to be cleaned frequently, since salt can damage the powder coating if no maintenance is applied.
- For deeper cleaning, use a soft nylon brush or a low-pressure air hose to clear the weave.
- Avoid abrasive cleaners and high-pressure water, both of which damage the fibre.
For hospitality operators, this is one reason to specify from a manufacturer rather than a reseller: colour-matched material and made-to-measure solutions stay available for the life of the set. See the Woven+ resin wicker collection for the range this covers.
What Is Normal on Rope Furniture — and What Is Not

Our rope is solution-dyed polypropylene and polyester, coloured through the fibre rather than on the surface, which gives it exceptional UV stability and colourfastness. Because the structure is hydrophobic it does not absorb water, so mould, mildew and bacterial growth do not take hold. The cord is woven under tension across the frame, and that tension is what every repair question comes back to.
- Fraying or a damaged end: do not trim or seal it yourself. Rope should not be exposed to sharp objects or aggressive handling, and an open flame near a tensioned weave is unsafe. Contact us and we will advise.
- Minor give: some settling is normal in a tensioned weave and does not mean the rope has failed.
- Significant sagging or a snapped cord: this needs re-stringing at the frame anchors, which is work for us. Contact us before attempting anything yourself — these solutions are made to measure.
What you can do yourself: blot or wipe light dirt with a soft cloth and a light mist of mild soapy water, and use a soft-bristle brush with a mild detergent for stubborn marks, working gently so the fibres are not stressed. Rinse thoroughly and let it dry completely in a shaded, well-ventilated area. A fabric and upholstery protector such as 3M Scotchgard™ improves stain resistance. Avoid aggressive scrubbing, hard brushes and high-pressure washing, which cause fraying. Explore the material in the Woven+ rope collection.
What Is Normal on Teak — and What Is Not

Teak is where the gap between “looks like damage” and “actually is damage” is widest. As a natural material it keeps evolving, and variations in colour, texture and surface appearance are part of its character without affecting quality or durability. Three things owners regularly report as faults are entirely normal:
- Fine cracks: small cracks may appear in the end grain of components such as legs or arms. They open and close with humidity, are purely cosmetic, and have no impact on strength, durability or serviceability.
- Natural oils: teak holds protective oils that may rise to the surface, looking darker or feeling slightly oily. This is normal on new wood and in direct sunlight, and fades as the piece weathers. Oil can also migrate during the first two to three months, so keep new teak off light-coloured porous surfaces and keep light fabrics off the wood in wet conditions.
- Colour variation and patina: new teak may show darker or orange-toned “wild” grain, which softens under sunlight within a short period. Over time the wood develops a soft silvery-grey patina. This is a natural development that enhances the material, not a fault to be reversed.
What you can do yourself: keep teak clean and dry, and store it in a dry, ventilated space such as a garden shed or garage over winter. Do not move furniture straight from outdoors into a heated interior — the sudden change in temperature and humidity increases the risk of surface checking. When using a cover, place spacers 10–15 cm high on three sides of a round table or all four sides of a square one so air can circulate, and check underneath that no water is pooling. Remove wet cushions and let both cushion and wood dry fully before refitting. See the Woven+ teak collection for construction detail.
The Frame: What to Watch For
Most woven outdoor furniture is built on a powder-coated aluminium frame. Aluminium does not rust, so frame issues are mechanical rather than corrosion-related — and because the weave is tensioned across the frame, frame problems affect the weave too.
- Wobble or instability: check the obvious first — an uneven surface, or a missing glide or foot on one leg. If the frame itself is moving, contact us rather than tightening into a tensioned structure.
- Damaged coating: contact us. A damaged coating on a commercial set is something which will be handled as a service case.
- Bent or deformed frame: structural deformation indicates either misuse or a fault. Photograph it and contact us for assessment.
Cushions: The Part That Genuinely Wears
Cushions are the one component that wears with use rather than weather, and the one you can most readily maintain yourself.
- Flattened foam: the insert can be replaced without replacing the cover. Contact us and we will match the foam specification to the original.
- Torn seams or zips: our covers are removable, so restitching or replacing a single cover is usually enough.
- Persistent staining: clean promptly — the sooner a spill is addressed, the less likely it is to set. Let covers dry fully before refitting, as trapped moisture is the main cause of cushion mildew.
When to Contact Us
The dividing line is simple. Cleaning, drying, covering and storage are yours. Anything involving the weave or the frame is ours. Contact us for a lifted, loose or broken resin strand, slack or frayed rope, a bent or damaged frame, or damaged coating. Send photographs of the affected area and of the piece as a whole — it is the fastest route to the right solution, because these are resolved case by case rather than from a parts catalogue.
For commercial buyers, sourcing from a manufacturer means colour-matched material, matching foam and made-to-measure solutions stay available well beyond the first years of service.
Frequently Asked Questions
What should you do about a loose strand on woven furniture?
Do not attempt to re-seat or glue it. The weave is tensioned across the frame, so an improvised repair risks deforming the surrounding strands. Photograph the area and contact us — our fibre identification technology means replacement material can be matched reliably to the original.
What should you do about frayed rope on outdoor furniture?
Contact us rather than trimming or sealing it yourself. Rope should not be exposed to sharp objects, aggressive handling or open flame, and re-stringing at the frame anchors is work for the manufacturer.
What causes a wobbly woven outdoor chair?
Usually the surface it stands on, or a missing glide or foot on one leg — check both first. If the frame itself is moving, contact us; the weave is tensioned across the frame, so frame problems are assessed as a whole.
Can individual resin wicker strands be replaced?
Yes, but as manufacturer work rather than a home repair. Our patented fibre identification technology means replacement material can be matched reliably to the original colour.
Is fine cracking in teak a defect?
No. Small cracks in the end grain of legs or arms are a normal response to changes in weather and moisture, opening and closing with humidity. They are purely cosmetic and have no impact on strength, durability or serviceability. The same applies to surface oils, wild grain and the silvery-grey patina teak develops outdoors.
Furniture Built to Last, and Supported When It Matters
Long service life starts at the design stage. Woven+ manufactures resin, rope and teak outdoor furniture in Indonesia, combining Western design with Indonesian craftsmanship. Our resin is certified to OEKO-TEX® Standard and REACH regulations, and all teak is sourced from FLEGT-licensed timber, verified through Indonesia’s V-legal system and the EU-backed FLEGT licensing scheme. When something does need attention, the solution is made to measure.
To specify woven outdoor furniture built for a long service life, request the Woven+ catalogue or contact our team for wholesale pricing and lead times.